﻿BAR 2.0.1
რიგელის (კოჭის) არმირების ნახაზი რეალური ღეროებით AutoCAD-ისთვის
Beam reinforcement drawing with realistic bars for AutoCAD
(c) 2026 Avtandil Shavadzele · rclisp.com

======================================================================
ქართული
======================================================================

1. პაკეტში
   BAR.VLX    - პროგრამა
   README.txt - ეს ინსტრუქცია

2. რა სჭირდება
   - AutoCAD (Windows), 2021 ან უფრო ახალი: AutoCAD 2020-სა და უფრო
     ძველში ფაილი არ იტვირთება. პროგრამა შემოწმებულია AutoCAD 2024-ში.
     AutoCAD LT-ში შემოწმებული არ არის.
   - ქართული ნახაზისთვის Windows-ში დაყენებული უნდა იყოს AcadNusx და
     AcadMtavr შრიფტები. სხვა ენებზე ნახაზი Arial-ით იწერება.

3. ჩატვირთვა
   - AutoCAD-ში: APPLOAD -> აირჩიეთ BAR.VLX -> Load.
   - რომ ყოველ გახსნაზე თავად ჩაიტვირთოს: APPLOAD -> Startup Suite
     (Contents...) -> Add -> BAR.VLX.
   - უსაფრთხოების ფანჯარაში აირჩიეთ "Load Once" ან "Always Load",
     ან ჩადეთ ფაილი სანდო საქაღალდეში
     (Options -> Files -> Trusted Locations).

4. ბრძანებები
   BAR       - ფანჯარა და ნახაზი: რიგელის კვეთი და გრძივი ხედი
   BARPLAN   - რიგელის გატარება გეგმაზე (ორი წერტილი, კვეთის ნიშნით)
   BARLONG   - უწყვეტი გრძივი ხედი გეგმაზე გატარებული რიგელებიდან
   BARSPEC   - არმატურის ცხრილი გეგმაზე გატარებული რიგელებიდან
   BARLANG   - ენის შეცვლა
   BARVER    - ვერსია
   BARKEY    - ლიცენზიის გასაღები
   BARPLAN, BARLONG და BARSPEC ფანჯრის ღილაკებიდანაც გაეშვება.

5. პარამეტრები
   ფანჯრის ზედა რიგში: ენა (12), ერთეული (სმ, მმ, დუიმი, ფუტი-დუიმი)
   და არმატურის სტანდარტი (12). ფანჯარაში იწერება რიგელის ზომები,
   ზედა, ქვედა, დამატებითი და გვერდითი ღეროები, ხამუთები, მალი და
   საყრდენების სიგანე, ჩაანკერებისა და გადაბმის სიგრძეები, მასშტაბები
   და ღეროების ხაზვის ხარისხი. პროგრამა ხაზავს შეყვანილი მონაცემებით:
   კვეთის ანგარიშს ან არმატურის შერჩევას არ აკეთებს.

6. საცდელი ვერსია
   პირველი გაშვებიდან 3 დღე. მთელი პროგრამა ხელმისაწვდომია. კვეთის,
   გრძივი ხედისა და ცხრილის სათაურებს აქვს ნიშანი [TRIAL]
   (ქართულ ნახაზზე [საცდელი]).

7. ლიცენზიის გააქტიურება
   1) ლიცენზია შეიძინეთ rclisp.com-ზე.
   2) გაუშვით BARKEY - გამოჩნდება კომპიუტერის კოდი (BAR2-XXXXXXX).
   3) ჩასვით შეძენის კოდი (Gumroad-ის ქვითრის License key) - პროგრამა
      თავად გააქტიურდება. საჭიროა ინტერნეტი.
   4) ინტერნეტის გარეშე ან AutoCAD LT-ში: ნებისმიერ მოწყობილობაზე
      გახსენით activate.rclisp.com, შეიყვანეთ კომპიუტერის კოდი და
      შეძენის კოდი, მიღებული გასაღები კი ჩასვით ბრძანებაში BARKEY.
   გასაღები მხოლოდ იმ კომპიუტერზე მუშაობს, რომლის კოდზეც გაიცა.
   Single ლიცენზია - 1 კომპიუტერი; Office - 5 კომპიუტერი
   (თითოეულ კომპიუტერს თავისი კოდი და გასაღები აქვს).

8. მნიშვნელოვანი
   პროგრამა ინჟინრის დამხმარე ინსტრუმენტია. ნახაზი და რაოდენობები
   უნდა გადაამოწმოს პასუხისმგებელმა ინჟინერმა.

9. კონტაქტი
   rclisp.com


======================================================================
English
======================================================================

1. Package
   BAR.VLX    - the program
   README.txt - this guide

2. Requirements
   - AutoCAD for Windows, 2021 or newer: the file does not load in
     AutoCAD 2020 and older. Tested in AutoCAD 2024.
     AutoCAD LT has not been tested.
   - Georgian drawings use the AcadNusx and AcadMtavr fonts (installed in
     Windows). All other languages use Arial.

3. Loading
   - In AutoCAD: APPLOAD -> select BAR.VLX -> Load.
   - To load it every time: APPLOAD -> Startup Suite (Contents...) -> Add ->
     BAR.VLX.
   - At the security prompt choose "Load Once" or "Always Load", or put the
     file in a trusted folder (Options -> Files -> Trusted Locations).

4. Commands
   BAR       - dialog and drawing: beam cross-section and elevation
   BARPLAN   - a beam line on the plan (two points, with a section mark)
   BARLONG   - continuous elevation from the beam lines on the plan
   BARSPEC   - reinforcement schedule from the beam lines on the plan
   BARLANG   - change the language
   BARVER    - version
   BARKEY    - license key
   BARPLAN, BARLONG and BARSPEC can also be started from the dialog buttons.

5. Settings
   Top row of the dialog: language (12), units (cm, mm, inch, feet-inch)
   and rebar standard (12). The dialog takes the beam dimensions, the top,
   bottom, additional and side bars, the stirrups, the span and the support
   widths, the anchorage and lap lengths, the scales and the bar drawing
   quality. The program draws what you enter: it does not design the
   section or choose the reinforcement.

6. Trial
   3 days from the first run. The whole program is available. The section,
   elevation and schedule titles carry a [TRIAL] mark.

7. Activating the license
   1) Buy a license at rclisp.com.
   2) Run BARKEY - it shows the computer code (BAR2-XXXXXXX).
   3) Paste the purchase code (the License key on your Gumroad receipt):
      the program activates itself. An internet connection is needed.
   4) Without internet or in AutoCAD LT: open activate.rclisp.com on any
      device, enter the computer code and the purchase code, then paste the
      key you get into BARKEY.
   A key works only on the computer whose code it was issued for.
   Single license - 1 computer; Office license - 5 computers
   (each computer has its own code and key).

8. Important
   The program is an aid for engineers. The drawing and the quantities
   must be verified by the responsible engineer.

9. Contact
   rclisp.com
